Ajat Philippines, Inc. (API) uses the following machine/equipment that will boost quality over time:


API Spray Polyurethane Foam (SPF) is now waterblown!

100% HCFC (Hydrochlorofluorocarbon)-141b Free. Compliance with Department of Environment and Natural Resources or the Revised Regulations on the Chemical Control Order for Ozone Depleting Substances (ODS).

Spray Polyurethane Foam (SPF) has efficient thermal performance that can reduce energy usage. Energy efficiency is enhanced with the use of Sprayed Polyurethane Foam (SPF). Compliant with Montreal Protocol on Substances that depletes the Ozone layer.

Spray Polyurethane Foam (SPF) Insulation is a two component mixture composed of isocyanate and polyol resin comes together at the tip of a gun, and forms an expanding foam that is sprayed onto roof tiles, concrete slabs, into wall cavities, or through holes drilled into a cavity of a finished wall.

Spray Polyurethane Foam insulation (SPF) blocks all three forms of heat transfer:

  • Conductive heat transfer (The flow of thermal energy through a substance from a higher to a lower temperature)
  • Radiant heat transfer (The process by which heat energy in the form of light)
  • Convective heat transfer (Heat which is created elsewhere that is transported by means of a fluid, such as water or in our case air)

What is the required spray polyurethane foam r-value?

R-Value is the building industry term for thermal resistance "per unit area". R-Value is the measure of how the barrier resists the conductive flow of heat. According www.energy.gov, the effectiveness of an insulation material's resistance to heat flow also depends on how and where the insulation is installed. The amount of R-value you'll need depends on your climate, type of heating and cooling system, and the part you plan to insulate.

Spray Polyurethane Foam Advantages:

  • Waterproof
  • Heat and Cold Insulation
  • Sound Insulation
  • Energy Saving
  • Economical
  • Long Lasting
  • Light Weight
Top 3 Common Reasons why choose Spray Polyurethane Foam Insulation


The Ajat Philippines Spray Polyurethane Foam (SPF) insulation is applicable to any kinds of substrate, that may include the following:

  • Spray Polyurethane Foam (SPF) on STEEL , SPF or Spray Polyurethane Foam can be applied above or below steel, like: steel deck, corrugated sheet, steel sheet, plain sheet, and/or the like.
  • Spray Polyurethane Foam (SPF) on CONCRETE , polyurethane foam spray for concrete is the best and most common option in asset preservation today. It will preserve the concrete, saves energy, and may act as waterproofing technique!
  • Spray Polyurethane Foam (SPF) on WOOD , SPF is best for wood. Over 90 percent of American homes are built with wood, according to the Western Wood Products Association because of its costs and longevity. And to preserve this, they used to spray with Spray Polyurethane Foam.

How to Apply Spray Polyurethane Foam?

Technical knowledge is very important in applying spray polyurethane foam insulation. The following are the most basic steps using the Ajat Philippines expertise:

  • Prepare the materials. The materials used were made by multi-national companies. We always make sure that the materials being used are of the best quality.
  • Prepare the equipment. In securing the top of line quality, you need to use the top of the line equipment. Ajat Philippines, Inc. (API) uses top of the line machines and equipment in applying spray polyurethane foam insulation.
  • Application of SPF. The application of Spray Polyurethane Foam (SPF) insulation must be done by technical person who are equipped with knowledge and skills. The output will always depend on the expertise.
  • Quality Checking. It is very important that in every application, thorough checking with the use of advanced inspection kits is advised. This will secure the quality of every application.

In attaining the best quality, it is always affiliated with THE BEST MATERIALS , TOP OF THE LINE EQUIPMENT, and TECHNICAL EXPERTISE.


API Foaming 2
API Foaming XP2
API Foaming E10HP

Projects Made with Excellence and Quality

Integrated Micro-Electronics Roof Insulation 1
Integrated Micro-Electronics Roof Insulation 2
Integrated Micro-Electronics Roof Insulation 3
Integrated Micro-Electronics Roof Insulation 4
Integrated Micro-Electronics Roof Insulation 5
Fish Hold 1
Fish Hold 2
Fish Hold 3
Fish Hold 4
Fish Hold 5
Fish Hold 6
Fish Hold 7
Jolyrob and Roel Fishing Fish Hold SPF Application
Fish Hold 9
Fish Hold 10
Dexter Caballero Fishing Fish Hold SPF Application
Fish Hold 12
Grand Summit Hotel Roof Insulation 1
Grand Summit Hotel Roof Insulation 2
Dole Philippines Reefer Van Cooling Insulation
Robinsons Mall Tarlcan Ground Floor Ceiling Insulation 1
Robinsons Mall Tarlcan Ground Floor Ceiling Insulation 2

Related Videos

Preparation and Application of Spray Polyurethane Foam (SPF) on Roof
Spray Polyurethane Foam (SPF) Fire Retardant Sampling
Spray Polyurethane Foam (SPF) Clients Testimonials
Spray Polyurethane Foam (SPF) Insulation

Request for Quotation Now!
You are about to answer a guide questions that will help us in determining the best quotation for your needs.
Please fill it up and Submit. Thank you and God Bless You.



  • Vhoug International Construction Group, Inc.
  • Dazzling Lite Enterprises
  • Integrated Micro-Electronics, Inc.


  • Bangko Sentral ng Pilipinas, (Monrio Industrial Corp) - Cebu City
  • Bangko Sentral ng Pilipinas, (Monrio Industrial Corp) - Bacolod City
  • Gluck Construction Services


  • Frabelle Fishing Corporation
  • Nori Macalipay
  • Marchael Sea Ventures Corporation
  • Our Good Deliveranz, Inc.
  • LPS Fishing Industry
  • Sto. NiƱo Aqua Fishing
  • GenSan Shipyard
  • TSP Marine Industries
  • Mommy Gina Tuna Resources, Inc. (MGTR, INC)
  • Dexter Caballero Fishing
  • Jolyrob Fishing
  • Roel Fishing
  • Grand Imperial Casino